Tansun Controllers for Infrared Heaters

Bluetooth Infrared Heating Controller

Tansun 3.0kW BLUETOOTH DIMMER with smart control.

- Controls all types of infrared heaters up to 3.0kW

- Step dimming via our dedicated Bluetooth App (iOS or Android), remote also included

- IP65 for use indoors or outside

- Sleek compact design

Part Code: QEC30

Time Lag Switch

Gain full controllability of your outdoor Tansun heaters with the Time lag switch. It is also suitable for damp areas indoors.

The Tansun Time Lag button is fully IP66 rated and can be adjusted and turn on the heater for a pre-determined period of time from 2 to 20 minutes. Pressing the touch-sensitive area brings the connected load on. The load is then switched off automatically after the time lag has elapsed. The switch's touch area is illuminated for easy location in the dark. The unit also benefits from tough, hard-wearing, poly-carbonate moulding.

Remote Controller for Infrared Heaters

The Tansun 6 Channel remote will allow six individual heaters/zones to be variably controlled. The remote can be configured to the receivers at the touch of a button, which makes it the most user friendly controller heating system on the market.

Heating Controllers

The Tansun Heater Controller Receivers offer high levels of control - allowing heaters to be dimmed from 100% -75%-50%-OFF. A built-in soft start feature is fitted as standard to protect the heater element & prolong lamp life. For use when multiple heaters are to be controlled the remote handset (supplied separately) allows up to 6 zones to be controlled simultaneously.

• Suitable for infrared and resistive heaters
• Automatic room temperature control
• Controlled by transmitters or wired pushbuttons
• Can also be controlled by wired or wireless movement sensors
• Dimming 50-75-100%
• Protection Rating: IP54

2.0KW IP54 Heating Controller

The Tansun wireless wall fixing 2kW Receiver with the dimmer function will control a resistive load of up to a maximum of 2000W. All Tansun infrared heaters can be dimmed down between four pre-set levels: 100%, 75%, 50%, OFF. Remote handset is required with the receiver but just one Tansun remote is able to control 1-1000 infrared heaters in unison.

6.5KW IP54 Heating Controller

The Tansun wireless wall fixing 6.5kW receiver with the dimmer function will control a resistive load of up to a maximum of 6500W. The Tansun infrared heaters can be dimmed down between four stages: 100%, 75%, 50%, OFF. This high quality receiver is suited to providing flexibility when controlling higher wattage heaters in many commercial environments.